7 Techniques To Open a Lock Box Without Knowing The Code

Opening a lock box without knowing the code can seem impossible. But with some simple steps and a little elbow-grease, it is possible to unlock the contents inside. In this guide, we will review the different tools available to help you open a locked box and provide tips on how to do so safely and successfully. Let’s get started! 

What Tools to Prepare For Unlocking a Lock Box Without the Code?

Here are some tools that may be useful when attempting to open the key lock box without the code:

Lock pick set

This is the most popular and widely used tool when trying to bypass a code lock without using a key. A lock pick set contains multiple tools designed to open various locks, including pin-tumbler, lever-tumbler, and tubular locks.

Bump key

It is a special type of key that resembles the shape of a regular key but has been modified to open certain types of locks. When struck with impact, either with a hammer or wrench, it can generate enough force to bump or jar the pins inside the lock and cause them to move into their correct positions so the lock will open.

Lock-picking gun

This tool operates by applying pressure to the pins inside the lock and moving them into their correct positions to open it. It is generally used on pin tumblers, lever tumblers, and tubular locks.

Paperclip and tweezers

A paper clip and tweezers can be used to manipulate a lock’s pins to open it manually. This is an effective method for unlocking combination locks, but it is time-consuming and requires patience.

Drill

Drilling through the lock is one of the fastest ways to open it without the code, but it is also the most destructive. It can be used on any type of lock but should only be attempted as a last resort.

Lock picking jig

This tool uses a series of pins that fit into the keyholes of locks and force them open. It’s an effective way to bypass a code-based lock without any key, but it can be difficult to use and is not recommended for inexperienced users.

Bypass tool

A bypass tool is designed to unlock certain types of locks using pins that fit into the keyholes. It works by inserting the pins into the correct positions and then turning or pulling them to open the lock. It is a fast and effective method, but it can be difficult and require some practice.

If you need to access a code-based lock without the code, or if your combination lock box has a system like standard reset codes in place, these tools can help. Besides doing a factory reset bypass, they could be just what is needed for unlocking!

With the right tool for the job, you can easily bypass any type of lock box without needing to remember the code.

What are the Methods of Opening Lock Boxes Without the Correct Combination?

If you’re locked out of your key box, personal protection box, cash box, or another lock box, you must understand how to open the key lockbox – with code or without.

Picking

Lock picking is a method of opening a lock without the correct combination by manipulating its internal components until it unlocks. This technique requires skill and patience, as well as specialized tools. Locksmiths often use it to gain access to locked doors and safes.

Decoding

Decoding is a method of opening a lock box using code wheel combination locks. A code wheel is used to determine the correct combination of numbers on the dial to unlock the lock box. This technique requires knowledge of how locks and codes work and specialized tools.

Bypassing Method

The bypassing method involves creating a bypass in a particular lock box by using different objects. This technique requires knowledge of how locks and codes work and specialized tools to manipulate the lock’s actuator.

Prying

Prying is a method of opening a lock without the correct combination by inserting an object into the keyway and then manipulating it to open the lock box. This technique requires knowledge of how locks and codes work and specialized tools.

Shimming

Shimming is a method of opening a lock without the correct combination by inserting an object between the pins or tumblers in the keyway and then manipulating them to open the lock box. This technique requires knowledge of how locks and codes work and specialized tools.

Drilling

Drilling is a method of opening a lock box with a keyed lock cylinder type. By drilling into the keyway and then manipulating the pins or tumblers to open combination lock boxes, this technique requires knowledge of how locks and codes work and specialized tools.

Cutting

Cutting is a method of opening a lock without the correct combination using an angle grinder or other cutting tool to cut through the lock box. This technique requires knowledge of how locks and codes work and specialized tools. It is often used when other techniques have failed or are not possible.

All these methods can be used to open a lock box without the correct combination, but they each have their own unique set of risks and should only be attempted when necessary. Furthermore, it is important to note that some countries may have laws prohibiting certain methods from being used, so it is always best to check with local authorities before attempting any of these techniques.

FAQ

Can I open a lock box without damaging it?

Yes, it is possible to open a lockbox without causing any damage if you are using the correct tools and techniques. Most lock boxes come with instructions on how to open them without damaging the lock or the box itself. If you need help opening the lockbox, it is best to seek professional help from a locksmith who can do this safely and quickly.

How long will it take to open a lock box without knowing the code?

The amount of time required to open a lockbox without knowing the code will depend on several factors, such as the type of lock, your skill level, and any other tools you may need. Generally speaking, it can take several minutes to an hour or more to successfully open a lockbox.

Do I need special tools to open a lock box without knowing the code?

Yes, you will need at least two specific tools to pick a lock: a tension wrench and a rake or other type of pick tool. Depending on the type of lock, you may also need additional tools, such as a pick gun or a tension bar. 

What is the difference between picking a lock and manipulating it?

Picking a lock involves using specialized tools like tension wrenches, rakes, hooks, and pick guns to interact with the lock’s internal components to open it without causing any damage. Manipulation, on the other hand, involves using a combination of techniques, such as jiggling or tapping the lock with tools to open it. It is essential to use the correct tools and techniques to pick or manipulate a lock to avoid causing damage to the locking mechanism. Professional locksmiths are trained to perform both of these tasks safely and quickly.

Final Words

The best practice will be to seek professional locksmith advice if you are unsure how to open a lock box without knowing the code. A qualified locksmith will be able to advise you on the best way to open your lockbox safely and quickly.

You can also use a combination of picking and manipulation techniques if you are more experienced with locksmithing. Again, it is important to use the correct tools and techniques to avoid causing damage to the lock or the box. It is advisable to seek professional help if you are unsure how to open a lock box without knowing the code. 

King Locksmith Atlanta is available 24/7 to provide expert advice and service. Contact us today for more information!